How To Hard Reset Redmi 10 Power

Here you can learn how to hard reset the Redmi 10 Power Android mobile. You can unlock your mobile when you forget your mobile password with these methods.

Some reset methods deletes all your mobile data. So read carefully before reset your mobile.

What is Hard Reset?

A Hard reset is a software restore of an electronic device to its original system state by erasing all of the data that were previously stored on the device.

Here is the detailed guide about Hard Reset

If you have any other problems check out this page Redmi 10 Power Troubleshooting

Hard Reset Redmi 10 Power with Recovery Mode

You can hard reset your Redmi 10 Power mobile with recovery mode without any software or tools.

This Hard reset method will delete

• Photos, videos
• Contacts
• Installed apps and settings etc.

The following tutorial shows all the steps of master resetting Redmi 10 Power.

Step 1: Use the Power key to disable the phone.

Step 2: Then hold down the Volume Up and Power keys together.

Step 3: When the Redmi logo appears, release the Power button. Let go of Volume Up when Recovery Mode pops up.

Step 4: Here, use the Volume rocker to navigate and the Power button to select. Move to the Wipe Data, where pick the Wipe All Data.

Step 5: Choose the Confirm position to begin the process. When the hard reset is completed, use the Back to Main Menu tab.

Step 6: Finally, turn on the phone by using the Reboot → the Reboot to System.

Step 7: Successfully completed reset your mobile.

Hard Reset Remotely with Google Find My Device

If you lose your Android device, you can easily find your device if you turn on the Google Find My Device option.

To lock erase or Reset an Android device remotely, make sure that mobile:

• Has power on
• Is connected to mobile data or WiFi
• Is signed in to your Google (Gmail) Account
• Has Find My Device turned on
• It is visible on Google Play

Note: If your mobile is off or is not connected to mobile data or WiFi, you may still find its most recent location if you’ve enabled the Store recent location option.

Steps to Erase Device Remotely:

• Take another mobile or Computer and on a browser, go to android.com/find.
• Sign in with your Google account which is used in your lost mobile.
• The lost device gets a notification.
• Now, You can see your device location (The location is approximate and may not be accurate).
• If you get a prompt on the screen, tap Enable lock & erase.
• Now you can see three options on the screen. 1. Play sound, 2. Secure device, 3. Erase device.
• Select what you want to do.
• Use the erase device option to reset your mobile.

Here is the detailed information about Google Find My Device.

Hard Reset with third-party software

If the above method is not working, you can use some third-party apps to reset or unlock your device.

Here we provide the best software to Reset and unlock your Android mobile.

Check out this link for Best Software’s for Android Mobile Hard Reset.

Additional Information

Backup Your Data: Before initiating a factory reset, it’s crucial to back up any important data such as photos, videos, contacts, and documents. This ensures you don’t lose valuable information during the reset process.

Battery Level: Ensure your Redmi 10 Power has sufficient battery charge before starting the reset process. Ideally, it should be at least 50% charged to avoid any interruptions during the reset.

Reset Protection: If your phone has MIUI’s Find My Device feature enabled, you may need to enter your Mi account password after the reset to verify your identity. Make sure you remember your Mi account credentials if this feature is activated.

Stable Internet Connection: If possible, connect your phone to a stable Wi-Fi network during the initial setup after the reset. This helps in downloading updates and setting up your device smoothly.

Recovery Mode Access Issues: If you encounter difficulty accessing recovery mode using the Volume Up + Power button combination, ensure both buttons are pressed simultaneously until the Mi logo appears. If it still doesn’t work, try variations like holding Volume Down instead of Volume Up, as different Xiaomi models sometimes use different key combinations.

FAQ – Frequently Asked Questions

1. How do I put my Redmi 10 Power in recovery mode?

Press the Power key to turn off the mobile. Then hold the Volume Down and Power buttons for a couple of seconds. Let go of the Power key when the Redmi logo shows up. Release Volume Up if Recovery Mode pops up. Now choose Wipe Data. Use the Volume keys to scroll down and the Power button to accept it.

2. Will fastboot erase data?

Yes, using fastboot commands typically involves operations that can erase data from your device. Fastboot is a protocol used primarily for flashing partitions on Android devices, such as system updates, custom ROMs, or recoveries.

Resources

• Here is the link for Redmi official support (Change your location at the bottom of the page).